Filter
Top Products
The oven is supplied with the controls
pushed in.
They have to be released before the
oven can be used.
After installation and before using the
oven for the first time the clock has to
be set.
When the oven is first switched on the
clock will show 12:00 until you have set
the correct time.
The display will go dark about 30
seconds after entering the time of
day.
The time will continue to run in the
background.
The time can also be set to show
constantly in the display. See
"Altering oven settings v – P I".
Set the time of day for the first
time
The time can only be entered when
the programme selector is at "0".
"I2:00" and the m (time of day) and V
symbols will light up.
The clock has a 24 hour display.
m
V
^
Press the multi-function selector
gently.
"I2:00" and triangle V underneath the
m symbol will start flashing.
^
Turn the multi-function selector
clockwise or anti-clockwise to display
the hour required.
^ Press the multi-function selector
gently.
This confirms the hour and the minutes
will then start to flash.
^ Turn the multi-function selector
clockwise or anti-clockwise to display
the minutes required.
^ Press the multi-function selector
gently.
This confirms the minutes.
When the time has been entered, the
display goes dark and the clock runs in
the background.
The time will appear again in the
display as soon as you press or turn the
multi-function selector.
Before using for the first time
17