Filter
Top Products
In the following example the time of day
is changed from 12:05 to 14:37.
^
Turn the function selector to "0".
lm
V
^
Turn the multi-function selector (right
hand dial) until triangle V is
underneath the m symbol in the
display.
^
Press the multi-function selector
gently.
The hour and the triangle V will start
flashing underneath the m symbol.
m
V
^ Turn the multi-function selector until
"14 shows in the display.
^
Press the multi-function selector
gently.
This confirms the hour and the minutes
will then start to flash.
m
V
^
Turn the multi-function selector until
"37" shows in the display.
^
Press the multi-function selector
gently.
This confirms the minutes.
The symbols go out in a couple of
seconds. The time set is now stored in
memory.
If the display is set to show the time, the
new time of day will show in the display.
To switch the display on or off see
"Altering oven settings v – P I".
The current time of day will reappear
even after a power cut.
The appliance stores this information
for approx. 200 hours. After that "12:00"
will flash in the display as it did when
first switched on.
Changing the time of day
23