Filter
Top Products
To dismantle the oven door
In the rare event that condensate has
worked its way in between the glass
panes, the door can be dismantled in
order to clean in between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface.
Do not use an oven spray. This
would damage the surface of the
aluminium surrounds.
^ Always remove the oven door before
dismantling it.
^ Place the door on a protective
surface (e.g. on a towel) to protect it
from breakage and to prevent it
getting scratched.
The door handle should line up with
the edge of the table. Make sure the
glass lies flat to protect it from
damage during cleaning.
The oven door is made up of a total of
four panes of glass.
Spacers are located next to the hinge
guides which keep the individual door
panes in position.
^
Push the spacers towards the centre
of the door and then pull them off.
If they are difficult to remove lift the
middle pane up a little. The spacers
should then be easier to move.
^
Carefully lift the inner pane up and
out.
Cleaning and care
61