Filter
Top Products
To ensure adequate ventilation to
the oven once installed:
- provide a ventilation cut-out in
the housing unit as illustrated.
- do not fit a rear panel into the
housing unit.
- do not fit insulation material
inside the housing unit.
Turn off the mains electricity supply
to the isolator.
^
Adhere the skid plates to the cabinet
floor.
^ Prepare the doors for removal.
Flip up the locking clamps on each
door hinge.
^
Slowly shut the door until the
protruding clamps stop the
movement. Pull the door upward and
off. Repeat with the other door.
^
Connect the mains cable from the
oven to the isolator.
^
Push the oven into the furniture
housing unit as far as the oven trim,
and align it.
Installing the oven
65