Filter
Top Products
To change the "status" of a
setting
^
Turn the programme selector to the
Lighting T / % position.
^
Touch the OK sensor.
PI
"PI" will appear in the display.
You can make changes to five settings
altogether ("PI"to"P5").
^ Touch sensor control V or W
repeatedly until the setting required
appears in the display.
^ Touch the OK sensor.
S0
^
The current status "S" of the setting
appears in the display.
^
The status can be changed by
touching sensor control V or W (see
chart above).
^
Touch the OK sensor.
The change to the status is then stored
in memory.
"P" will appear in the display again
together with the number for the setting.
You can make changes to further
settings as long as you have not turned
the function selector back to the "0"
position.
The settings are retained in the
event of a power cut.
Settings
40