Filter
Top Products
To operate the oven manually, switch
the appliance on, select the oven
function and temperature, then
switch it off again once you have
finished cooking.
^
Place the food in the oven.
^
Select the function you want (e.g. Fan
plus U).
The following will appear in the display:
–
The function selected (in this example,
Fan plus).
–
The recommended temperature
"160".
^ Change the temperature in the
display if necessary, using the
temperature selector.
The oven heating and the cooling fan
will switch on.
The lighting switches off automatically
after approx. 15 seconds. If you wish,
you can set the lighting to be on all the
time. See "Settings - Lighting".
You can follow the progress of the
programme in the display.
In addition to the cooking function and
temperature, the words "Heating-up
phase" will show in the display until the
oven has reached the temperature
selected.
Once the temperature selected has
been reached
–
"Heating-up phase" will go out in the
display.
–
A signal will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
If you touch the OK sensor during a
cooking programme, the duration, start
time, finish and moisture reduction
options will appear.
^
At the end of the programme, turn the
function selector to "0" and remove
the food from the oven.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
You can change the default setting for
this (see "Settings - Cooling fan
run-on").
Manual operation
27