Filter
Top Products
Pyrolytic
–
With reminder
A reminder to carry out the pyrolytic
cleaning process will appear in the
display.
–
Without reminder
(Factory default)
You will not be reminded to carry out
the pyrolytic cleaning process.
Heating phase
The heating phase can be changed
with the Fan plus U, Conventional
heat V and Auto roast [ functions.
– Rapid
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
– Normal
Only the heating elements for the
cooking function selected are
switched on.
Recommended temperatures
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
All of the functions which allow a
temperature change are listed.
When you select a function the
recommended temperature is
highlighted.
The setting range selectable with the
temperature selector will also appear.
Display
Contrast
The contrast is represented by a bar
with seven segments, where one
segment is filled in.
Factory default: NH H H TTTTT H H HN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
Brightness
The brightness is represented by a bar
with seven segments, where one
segment is filled in.
Factory default: NH H H KKKKK H H QN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
Volume
Buzzer tones
The volume of the buzzer is
represented by a bar with seven
segments, where one segment is filled
in.
Factory default: NH H H KKKKK H H QN
To change the setting, move the solid
segment to the left or right with the ? or
; sensor.
If none of the segments is filled in, the
buzzers are switched off.
Settings
43