Filter
Top Products
Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure correct functioning of the
appliance, let it stand for between ½
and 1 hour after transporting it to its
final location before connecting it to
the mains. This is important for the
correct functioning of the appliance.
Switching on
The refrigerator and freezer sections
are switched on independently of one
another so that, if required, you can
switch on only one section.
Refrigerator section
^
Press the On-Off button for the
refrigerator section.
Bars will appear in the temperature
display for the refrigerator section. The
refrigerator section starts cooling. The
interior light will come on when the door
is opened.
Freezer section
^
Press the On-Off button for the
freezer section.
Bars appear in the temperature display
for the freezer section and the alarm
sounds. The freezer section starts
cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off the alarm
^
Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
Cool pack
Place the cool pack in the top drawer of
the freezer section. The cool pack will
be at its most effective after it has been
in the freezer for approx. 24 hours.
Switching on and off
12