Filter
Top Products
^
Remove the two screws from the top
of the bearing block.
^ Swing the door out to the side, then
lift it up and off.
Refitting the parts:
^
Unscrew bearing block e.
^
Remove cover f.
^
Refit cover f on the opposite side by
turning it 180° and then pushing it in
from the side. Netx, turn the earthing
contact g around and fit it on the
opposite side, too.
^
Fit the spacer bushings at the back
of the bearing block on the opposite
side.
^
Screw the bearing block onto the
opposite side.
^
Pull the grey cover on the bearing
block forwards (1) and push it into
the other side of the bearing block
(2).
Changing the door hinging
51