Filter
Top Products
Exchange cover h in the middle of the
appliance with hinge bracket i.Todo
this:
^ Unscrew cover h and hinge bracket
i.
^ Pull bearing bushing k upwards out
of the hinge bracket and then pull
hinge pin j downwards and off.
^ Turn the cover and bracket around
and screw them securely into the
opposite side.
^ Replace bearing bushing k into
hinge bracket i from above and
then push hinge pin j, long side
first, from below into the hinge
bracket.
Important: When fitting the bearing
bushing and the hinge pin, make
sure that they both fit correctly in the
hinge bracket.
Refitting parts in the upper appliance
door:
^
Pull the bearing bushing approx. 2
cm out of the door (1).
^ Using a screwdriver, carefully
remove the covers from both sides
(2).
^
Loosen both screws in the insert (see
arrows).
Changing the door hinging
52