Rapid ignition system
The appliance has a rapid ignition system with the following
features:
–
Rapid ignition without pressing and holding the control dial
–
Automatic reignition
If the flame is extinguished by a draught, etc. the burner is
automatically reignited. If reignition is unsuccessful, the
gas supply is automatically cut off (see "Thermoelectric
ignition safety device")
Controls
The control is used to ignite the burner and to regulate the
strength of the flame.
Small, medium and large burners
ß The gas supply is turned off
& Strongest flame
/ Weakest flame
Wok burner
ß The gas supply is turned off
& Strongest flame:
The inner and outer burners operate at the highest setting.
& Strong flame:
The outer burner operates at the lowest setting,
the inner burner at the highest setting
/ Weak flame:
The outer burner is switched off,
the inner burner operates at the highest settling
/ Weakest flame:
The outer burner is switched off,
the inner burner operates at the lowest setting
Operation
19