Filter
Top Products
Problem Possible cause Remedy
If there is a power cut
during operation
Turn all the controls clockwise to the "ß"
position. You can then operate the appliance
as normal when power is restored.
The gas flame goes out
after ignition
The flames are not
touching the ignition safety
device, it is not hot
enough:
- The burner is not
correctly assembled.
- There is dirt on the
ignition safety device.
Assemble the burner correctly.
Remove any soiling.
The flame pattern has
changed
The burner is not correctly
assembled.
Assemble the burner correctly.
The burner head or burner
cap holes are dirty.
Remove any soiling.
The flame goes out
during operation
The burner is not correctly
assembled.
Assemble the burner correctly.
The ignitor on the burner
does not spark.
Check whether the mains
fuse has tripped.
If it has, contact a qualified electrician or
Miele Service.
- Food residues between
the ignitor and the burner
cap.
- Food residues on the
ignition safety device
Remove any soiling. Please see "Cleaning
and care" for details.
Power cut. Turn all the controls clockwise to the "ß"
position. You can then operate the appliance
as normal when power is restored.
Problem solving guide
31