Filter
Top Products
Before using for the first time
The stainless steel surfaces have a
layer of protective foil to prevent
scratching during transportation.
^
Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^
After removing the protective foil,
treat stainless steel surfaces with a
suitable stainless steel conditioning
agent (available from
www.miele-shop.com).
Important: Stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
The upper and middle temperature
zones can only be switched on and off
together, whereas the lower
temperature zone can be switched on
and off separately. In this way the
lower temperature zone, for example,
can be switched off if not required.
^
Press the On/Off button for the zone
you wish to switch on until the
temperature display lights up or
flashes.
The appliance will begin to cool down,
and the interior light comes on when
the door is opened (the interior light
only comes on when both upper zones
are switched on).
Switching off
^ Press the On/Off button for the zone
you wish to switch off until the
temperature display goes out.
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).
Safety lock
The safety lock can be used to prevent
the two upper zones or the lower zone
from being switched off inadvertently.
Activating or de-activating the safety
lock
^
Press and hold the constant humidity
button for the relevant zone for
approx. 5 seconds.
The constant humidity button indicator
light will start flashing and a
; will flash
in the relevant temperature display.
Switching on and off
12