Filter
Top Products
Temperature display brightness
The appliance is supplied with the
brightness of the temperature displays
set as low as possible.
You can adjust the brightness of the
temperature displays (the temperature
displays for the upper and middle
zones are adjusted together):
^
Press and hold the constant humidity
button for the relevant zone for
approx. 5 seconds.
The constant humidity button indicator
light will start flashing, and a
; will flash
in the relevant temperature display.
^ Press one of the temperature selector
buttons repeatedly until
^ appears in
the display.
^
Press the constant humidity button
again.
^ will light up in the display.
^
You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: lowest setting,
5: brightest setting.
^
Press the constant humidity button to
save the setting.
^
Press the relevant On/Off button to
come out of the setting mode.
If you do not do this the electronics
will revert automatically to normal
operation after a couple of minutes.
Humidity level
It is very important to store wine in an
atmosphere with a high humidity level
so that the corks remain moist on the
outside. A refrigerator with its low
humidity level is therefore not the best
place to store wine. Low humidity
causes corks to dry out from the
outside, and so do not seal the bottles
as tightly. Wine should be stored lying
down to keep the corks moist from the
inside too. Air entering the bottle will
inevitably spoil the wine.
The ideal humidity level of up to 70 %
will be maintained inside the appliance
as long as the ambient room
temperature is between 15°C and
35°C.
Useful tip: Before serving, stand the
wine upright for at least two hours, or
the entire day if possible, to allow any
sediment to settle at the bottom of the
bottle.
The optimum temperature and humidity
16