Miele KWT 4974 SG ed Refrigerator User Manual


 
Any vibration or movement of the bottle
can affect the wine by interrupting the
natural respiration process and so
impair the taste.
As far as possible, store bottles of the
same type of wine beside each other
on the same shelf. Removing a bottle of
one type will then leave the other types
undisturbed and will avoid the need to
move different bottles around.
Please make sure that the vents at
the top of each of the three
temperature zones are not covered
by bottles. This is important for the
correct functioning of the appliance.
Use these areas to store narrower
wine bottles.
Wooden shelves
Each wooden shelf has a load
bearing capacity of 50 kg and can
support a maximum of 4 layers of
bottles (each row taking 9 x 0.75 litre
bottles).
The wooden shelves are on runners
which can be pulled out to make it
easier to store and remove bottles.
The wooden shelves can be removed if
required.
^
Pull out the wooden shelf on its rails
until it stops, then lift it up and out.
^
To replace the shelf, click it into
place on the extended rails.
Descriptive labels
Use the labels supplied to identify your
wine quickly and easily. Insert the
labels into the strips at the front of the
shelves from above.
Additional labels can be purchased
from your Miele Dealer or the Miele
Spare Parts Department.
Maximum capacity
A total of 143 bottles (0.75 l) can be
stored in the appliance, with 36 in the
upper zone, 45 in the middle zone and
62 in the lower zone.
Door lock
You can lock the door of the wine
conditioning unit to prevent it being
opened without your knowledge.
^ Insert the key into the door lock.
^ Press it down and turn it 90° until the
door lock engages.
^
Remove the key by pulling it
upwards.
To unlock the appliance, carry out the
procedure in the reverse order, turning
the key in the opposite direction.
Storing wine bottles
19