Filter
Top Products
The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
,
We recommend that the
changing of the door hinging is
carried out by a qualified kitchen
fitter.
It is essential that the procedure is
carried out by two people. The glass
door is very heavy and could break.
Changing over the door:
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
^ Close the appliance door.
^ If necessary unlock the door.
^
Unscrew screw a out of lower hinge
bracket b.
Caution.
The door is very heavy.
^
Raise the door, open it outwards and
remove it carefully.
^
Remove cover d. Unscrew lower
hinge bracket c and refit lower hinge
bracket b on the opposite side. Refit
cover d on the opposite side.
On the underside of the appliance
door:
^
Remove door opening limiter e and
refit it on the opposite side.
^ Remove cover cap f and pull hinge
pin g and bearing bush h out from
underneath the other side of the
door.
^ First refit bearing bush h and then
hinge pin g on the opposite side.
Please note the shape of the notch in
the bearing bush (insert x).
^
Now turn hinge pin g 90 ° until it is
securely positioned in bearing bush
h.
^
Remove cover i from the top of the
appliance and unscrew hinge
bracket j.
^
Insert hinge pin k in the second hole
of hinge bracket j.
^
Refit brackets l and m as well as
cover n turned through 180° on the
opposite side.
^
Screw hinge bracket j into the
opposite side.
^
Turn cover i through 180°, and fit it
on the other side.
Changing the door hinging
33