Filter
Top Products
^
Remove cover o from the top of the
appliance door.
^
Place the door on upper hinge pin k.
^
Swing the door slowly inwards so that
lower hinge pin g fits into the guide
on hinge bracket b.
^
Close the door and align it both
vertically and horizontally.
^
Insert screw a into the outer hole of
hinge bracket b and tighten to
secure the hinge pin in the hinge
bracket.
^
Carefully lever recessed handle
fascia p away from the door by
inserting a flathead screwdriver into
groove q as shown.
Be careful not to let the screwdriver
slip and cause damage to the
appliance.
^
Carefully remove handle fascia p
towards the right hand side.
^ Now insert handle fascia p into the
handle strip on the opposite side of
the door. Work it in methodically until
it is sitting flush at the sides.
^ Place cover caps f and o into the
now open handle strip from the
inside so that the plugs are not
visible from the outside.
Changing the door hinging
34