Filter
Top Products
Programming the end of
cooking time
The duration and end of a process can
be pre-programmed. This applies to
any method of operation your appliance
offers.
^
Proceed as for starting a process.
^
However at the end do not press the
START button. Instead press the r
button.
The time of day will flash in the dis
-
play. (The programme duration is au
-
tomatically added ).
^ Use the rotary selector to enter the
time you wish the process to finish.
The h symbol flashes, the end time
will light up as well as the symbols for
the method of operation selected and
r as a symbol for a programmed
end of cooking time.
^ Press START.
r and the time of day will light up in
the display.
The appliance will switch on automati
-
cally and then off at the selected end of
cooking time.
If the end of cooking time is pro
-
grammed for microwave operation
make sure that there is food in the
oven.
To check the end of cooking time
It is possible to check the end of cook
-
ing time before a programmed process
has started.
^
Press r , the selected method of
operation and the pre-selected end
time will appear.
Large cooking dishes
If the dish extends beyond the size of
the turntable it might not turn around in
the oven. If this is the case the turntable
must be switched off.
^ Press ä.
If the door is opened before a start-
ing time has commenced
^ Press the h button again after clos-
ing the door. The appliance will then
start at the pre-selected time.
To change programmed times
^
Press the Stop/C button and
programme the start time in again.
To delete programmed times
^
Press the Stop/C button.
Operation
24