If the connection cable is damaged
the new cable must be fitted by a
Miele approved service technician.
Do not position the appliance too
close to adjacent furniture.
A ventilation gap of at least 5 cm is
required around the appliance. The
ventilation gap above the appliance
should be at least 14 cm.
When installing the appliance ensure
there is sufficient ventilation under
-
neath and to the rear of the appli
-
ance.
Do not place any objects on the ven
-
tilation outlets or block the gap be
-
tween the base of the appliance and
the worktop surface
The microwave oven can be:
– placed on a worktop.
– built into a tall unit or into a unit un-
der a worktop using a suitable build-
ing in frame*. The measurements
given in its fitting instructions must
be observed.
Exception: Appliances with a stain
-
less steel front must not be built-un
-
der a worktop.
*Available from your Miele Dealer or the
Miele Spare Parts Department.
Installation and connection
41