Filter
Top Products
Electrical connection AUS / NZ
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with na
-
tional and local safety regulations.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230-240 V/50 Hz a.c. single phase
supply.
The voltage, rated load and fusing are
given on the data plate which is located
externally on the rear wall of the appli
-
ance. Please ensure that these match
the household mains supply.
Connection should be made via a suit-
able isolator, which should be easily ac-
cessible after the appliance has been
installed.
For extra safety it is advisable to install
a residual current device with a trip cur-
rent of 30 mA.
AUS / NZ
The plug rating is 15 A.
Test marks Electrical safety
C-Tick Mark
Electrically suppressed
according to AS/NZS 1044
Important
The wires in the mains lead of this ap
-
pliance are coloured in accordance
with the following code:
Green/yellow = Earth
Blue = Neutral
Brown = Live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the markings identifying the
terminals in your plug, proceed as fol-
lows:
The wire coloured green and yellow
must be connected to the terminal in
the plug which is marked with the letter
E or by the earth symbol z or coloured
green or green and yellow.
The wire coloured blue must be con
-
nected to the terminal marked with the
letter "N" or coloured black. The wire
coloured brown must be connected to
the terminal marked with the letter "A" or
coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Electrical connection
40