Filter
Top Products
7
DAILY CLEANING
1. Turn dishwasher and wall switch OFF.
2. Remove the overflow to drain wash tank.
3. Remove scrap screens and wash pump inlet screen. Rinse thoroughly to make sure that
they are clean. Do not bang or beat them on the side of sink or other hard objects as this
will eventually cause them to break or bend thus causing them to fit or work properly.
4. Reinstall the overflow, pump screen, and the scrap screens.
Frequently check and clean the nozzles. Blocked nozzles will prevent the machine from
cleaning properly. To clean the wash/rinse arms:
1. Undo the thumbscrew that holds the arms in place. Do not remove the retaining plate.
2. Twist and remove the end nozzle then withdraw the end cap.
3. Flush arms with water, use a toothpick or paperclip (if necessary) to clear the nozzles.
4. Do not beat the arms on anything to clean nozzles.
5. Replace end cap and end nozzle.
6. Replace arms back into position in machine.
To flush out dishwasher if needed:
1. Leave the overflow out of machine.
2. Close the door.
3. Turn power ON at the dishwasher.
4. Leave on machine on for about 20 seconds. DO NOT leave machine unattended during
this process.
5. Shut power OFF to dishwasher.
MAINTENANCE