Filter
Top Products
G
ETTING
To Know
Y
OUR
GRILLSMART’”
I
NDOOR
GRILL
ARCHED GRILLING
SURFACE
\
COOL-TOUGH
j
SAFETY HANDLES
B
ASE
READY’
LIGHT
DIRECTIONS
foR
DRILLING
1.
Wash Grill Surface and Base in hot, soapy water.
Rinse
and dry thoroughly.
2. Attach Grill Plate to Base. Make sure that the clip on the bottom of the Grill Plate
clicks into place, (See Diagram on
fdge
6)
3. Set Temperature Dial to “OFF.” Insert Temperature Control into the Temperature Control
Receptacle and plug the Cord into a standard 120 volt AC outlet. If Temperature Control
is not completely inserted, abnormal heating may occur, resulting in accident or damage.
4. Set Temperature Dial to desired setting.
5. Ready Light goes off when correct cooking temperature is reached.
6. When food is completely cooked, it. can be kept warm by setting Temperature Diat
to “KEEP
WARM!’
7. After use, set Temperature Dial to “OFF” position, unplug unit from outlet and then
unplug from Temperature Control Receptacle.