Filter
Top Products
8. COOK TIME. Touch this pad followed by
Number pads to enter cooking times.
9. COOK POWER. Touch this pad, after the
cook time has been set, followed by a
Number pad to set the amount of microwave
energy released to cook the food. The higher
the number, the higher the power or faster
the cooking speed.
10. CLOCK SET. Touch this pad followed by
Number pads to enter the correct time of
day.
11. Number Pads. Touch Number pads to enter
cooking times, cook powers, and quantities.
12. ADD MINUTE. Touch this pad to cook for
one minute at 100% cook power or to add an
extra minute to your cooking cycle.
13. OFF/CANCEL. Touch this pad to erase an
incorrect command or to cancel a program
during cooking. This pad will not erase time
of day.
14. START/ENTER. Touch Number pads to
enter cooking times, cook powers, and
quantities.
NOTES:
If you choose an auto cook function and
change your mind, you must press OFF/
CANCEL before you choose another auto
cook function.
If you attempt to enter unacceptable
instructions, three tones will sound, and
“Err” will appear on the display. Touch OFF/
CANCEL and re-enter the instructions.
Once you choose a function, an indicator
light (
will flash as a prompt for the next
action you need to perform.
If you choose a function but do not press
another command pad within one minute, the
dispaly returns to the time of day and you
have to start over again.
If you have entered all settings for a
function but do not touch the Start/Enter pad
in 5 seconds, the Start? indicator light will
flash.
If you open the door while the oven is on
and then shut the door, the Start? indicator
light will flash.
Audible signals
Audible signals are available to guide you
when setting and using your oven:
A programming tone will sound each time
when you touch a pad.
Four tones signal the end of a cooking cycle
and two tones will sound every minute until
you open the door or press the command
pad.
Three tones will sound if you enter
incorrect instructions.
Interrupting cooking
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan
stops, but the light stays on.
To restart cooking, close the door and
TOUCH
If you do not want to continue cooking:
Close the door and the light goes off.
OR
TOUCH
NOTE: Before setting a function, touch CANCEL to
make sure no other function is on.
7
CANCEL
START