Panasonic KY-B64CG Cooktop User Manual


 
21
Available on the cooking zone with
.
1. Touch and hold the main power key to turn on
the power.
2. Select the cooking zone with
.
3. Touch Autoboil key. The appliance beeps 5 times
when the water reaches boiling point and the
boiling temperature is maintained. After beeping
add ingredients and adjust the heating power with
the slider as required.
4. Touch and hold the key of the cooking zone or
set the power level to “0” to turn off.
Autoboil Mode
(KY-B64CG model only)
IH Cooking
NOTE
Cookware with a non-stick coating may affect the sensor
detection. After beeping, adjust the power level as required.
Timer can be used with Autoboil Mode. (See page 26 - 27).
Cooking Timer can be used with Autoboil Mode. (See page 26)
NOTE
Temperature ‘100’ will ash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to “7”. Increase or decrease the power level as
required.
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
Use a lid until boiling.
Use a minimum of 0.5 L of water.
In order to prevent water boiling over from the pan, the
following is recommended.
No more than 70% pan capacity should be used.
There should be a minimum gap of 30 mm
between the lid and the water surface.