Filter
Top Products
- 12 -
B. PROGRAMMED HEATING
◆
In Program Unlock Mode:
INSTRUCTION
DIGITAL DISPLAY WINDOW
PAD
2
Press the Desired Memory Pad “5”.
☛ The currently programmed information will be indicated.
5
1
A
PROG
3
Press Start pad.
☛ The oven lamp will turn on and heating will start. The heating time will
count down.
1
A
PROG
MAKE SURE THE UNIT IS PROPERLY PROGRAMMED (see page 14 - 15).
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
go blank.
◆
In Program Lock Mode:
Just press the desired Memory pad. Heating will automatically start without pressing Start pad.
Example: To select Memory pad “5” at A side in which your desired heating program (at HIGH power for
3 min., single stage heating) is set
1
Open the door and put the food in the oven.
☛ The oven lamp will turn on and “0” will appear.
Note:While “0” appears, operation is available. One minute after the door
is closed, “0” will disappear.
Note:
• When you want to select Memory Area B, press Memory Shift pad before pressing the desired Memory pad.
AB
How to Operate NE - 3280/NE - 2180/NE - 1880