Filter
Top Products
English
- Eng-16 -
Sensor Reheat Setting
1. Press once. 2. Set the desired temperature
by using Menu/Power/Temp.
dial.
3. Press once.
After detecting for a period of time,
the approximate current temperature
will appear in the display window.
This feature can cook food without setting power and time, only according to the temperature as your require. The field is
-10~90°C. The recommended weight is 200-600g.
Notes:
1. The default setting is 70°C when plugging in. From the second time, the default setting will be changed to previous setting
if between 55~75°C.
2. After reheating, stir then serve.
3. The food must be put in the center of ceramic plate.
4. For the beverage, the reheat field is 1-4 cups (200ml/cup). After reheating, stir carefully. Arrange the containers as figure.
1 cup
3 cups
2 cups
4 cups
oven door
position
Container
5. The plastic wrap should cover the food tightly, otherwise, the temperature of food may not be tested. If the plastic wrap is
overlapped, make sure the overlapped area is placed downwards.
Plastic wrap
Food
6. Food less than 100g can not be detected. It may cause overcook.
7. If the temperature of the cavity is too high, sensor reheat feature can not be used. Display window will appear "HOT".
Sensor reheat feature can be used again until the "HOT" disappears.
8. The actual temperature maybe different from the required temperature. It depends on the cavity temperature, the food
density, the container, the placement of the food etc.
9. Avoid using straight-sided containers with narrow necks when using Sensor Reheat.
IP1589_38S80KP_Eng_06_071227.indd 16IP1589_38S80KP_Eng_06_071227.indd 16 2007-12-27 Good Tom 15:50:112007-12-27 Good Tom 15:50:11