Filter
Top Products
English
- Eng-27 -
Before Requesting Service
PROBLEM POSSIBLE CAUSE REMEDY
Oven will not turn on.
The oven is not plugged in securely.
Remove plug from outlet, wait 10 seconds
and re-insert.
Circuit Breaker or fuse is tripped or
blown.
Contact the specified service center.
There is a problem with the outlet.
Plug another appliance into the outlet to
check if the outlet is working.
Oven will not start cooking.
The door is not closed completely. Close the oven door securely.
Start button was not pressed after
programming.
Press Start button.
Another program has already been
entered into the oven.
Press Stop/Reset pad to cancel the
previous program and program again.
The program has not been entered
correctly.
Program again according to the Operating
Instructions.
Stop/Reset pad has been pressed
accidentally.
Program oven again.
"HOT" appears in the display
window.
The cavity is overheated. Operate again after it cools down.
"U14" appears in the display
window.
The water tank is empty. Full it with water.
"H00" or "H02" appears in
the display window.
The oven is defected. Contact the specified service center.
"DEMO MODE PRESS ANY
KEY" appears in the display
window.
The oven is under demonstration
mode.
Press Timer/Clock pad 4 times to exit the
mode.
The " " and " "
appears in the display
window.
The Child Lock was activated by
pressing Start button 3 times.
Deactivate Lock by pressing Stop/Reset
pad 3 times.
The oven stops cooking by
microwave and "H97" or
"H98" appears in the display
window.
This displaying indicates a problem
with the microwave generation
system.
Please contact an authorised Service
Center.
If it seems there is a problem with the oven, contact an authorized Service Center.
IP1589_38S80KP_Eng_06_071227.indd 27IP1589_38S80KP_Eng_06_071227.indd 27 2007-12-27 Good Tom 15:50:132007-12-27 Good Tom 15:50:13