Filter
Top Products
This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
1. Select Connections.
2. Press the cursor right.
3. Select the input to which the peripheral equipment is
connected.
> When you select
EXT1, EXT2, EXT3, HDMI 1,
HDMI 2, VGA, Side, AUDIO IN L/R or DIGITAL
AUDIO IN
,a list appears which allows you to identify
which type of peripheral equipment is attached to this
input.
4. Press the cursor right again to enter the list of types of
peripherals connected to the selected input.
5. Select the peripheral equipment with the cursor up/down.
Digital Audio In
If a peripheral equipment has a digital audio output, you can
connect this with a single cable to the TV’s
DIGITAL
AUDIO IN
connector.
In the Connections menu, assign the
DIGITAL AUDIO IN
to the corresponding external input to which your
peripheral equipment is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO OUT connector to an external amplifier
or receiver. If your amplifier or receiver has a matching
connector for Digital Audio In, you can connect it with a
single cable to the TV's
DIGITAL AUDIO OUT.
See To make video and audio connections, Connect a Home
Cinema amplifier, p. 54.
Select your connections
EN
33
Info
TV menu
Installation
Connections
EXT1
EXT2
EXT3
HDMI 1
HDMI 2
VGA
Side
AUDIO IN L/R
DIGITAL AUDIO IN
.............
Time zone
Channels
Manual network i..
Preferences
Connections
Decoder
Factory settings
Software upgrade
2504.4 en 13-12-2006 08:29 Pagina 33