Filter
Top Products
19
5 Push back the steam inlet (1), connect the milk tube (2) and
close the milk container lid cover (3).
Note: Push back the steam inlet before you close the lid, otherwise the steam
inlet does not t anymore.
Note: Make sure you push the milk tube far enough onto the connector so that
the holes in the connector are covered.
6 To fasten the milk container lid onto the milk container, rst
push the front of the milk container lid onto the edge of the milk
container (‘click’) (1) and then push the rear end onto the milk
container (‘click’) (2).
Note: Make sure all parts of the milk container lid are dry before you
reassemble the lid.
Note: Always check if the lid is xed properly onto the milk container to
prevent spillage when you place the milk container unit in the machine.
7 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever (‘click’) (2).
Danger: Never immerse the machine in water or any other liquid.
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a damp cloth.
3 Remove the coffee collector.
3
2
1
1
2
1
2
19