Filter
Top Products
45
ENGLISH
45
2
Remove the Automatic Milk Frother from the steam/hot water wand.
3
Remove the “INTENZA+” water lter (if supplied) from the water tank if
it was installed.
4
Press the “ ” button. Press the “ ” button until the following
display is shown.
Yellow
Red
5
Press the “ ” button to enter the descaling menu.
Note:
If you press the “
" button by mistake, press the “ " button to quit.
6
Remove the water tank and pour the entire content of the Saeco des-
caling solution. Fill the water tank with fresh water up to the MAX level.
7
Place the water tank back into the machine.
8
Place a large container (1.5l) under the steam/hot water wand and the
dispensing spout.