Filter
Top Products
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed selector.
Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and
loosen the ingredients with a spatula or add some liquid.
Note: Always let the appliance cool down after chopping meat with the blade unit.
9 After processing, release the on/off button or the turbo speed button to switch off the
appliance. Then wait until the blade unit has stopped rotating.
10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it
(2). (Fig. 9)
Tips
- The appliance chops very quickly. If you use the turbo speed button, use it briey to prevent the
food from becoming too nely chopped.
- Do not let the appliance operate too long when you chop (hard) cheese or
chocolate. Otherwise these ingredients become too hot, start to melt and turn lumpy.
- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and
ice cubes, as this may cause the blade unit to get blunt.
Combination disc
The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,
potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other
side for shredding. You can switch from slicing to shredding and the other way round by simply
turning the disc.
Never process hard ingredients like ice cubes with the combination disc.
The cutting edges of the combination disc are very sharp. Do not touch them.
1 Place the tool holder in the bowl (Fig. 5).
2 Place the combination disc on the tool holder with the slicing or shredding side facing up,
depending on the result you want (Fig. 10).
3 Putthelidonthebowl(1).Turnthelidanticlockwise(2)toxit(‘click’)(Fig.7).
4 Put the ingredients in the feeding tube.
- Pre-cut large ingredients into chunks that t in the feeding tube.
- Fill the feeding tube evenly for the best results.
- When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator
temperature.
5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).
6 Press the on/off button or the turbo speed button to switch on the appliance.
- When you use the on/off button, you can adjust the speed with the speed selector. The higher
the speed, the shorter the processing time required.
- When you use the turbo speed button, the appliance operates at maximum speed. In this case,
you cannot adjust the speed with the speed selector.
7 Press the pusher lightly onto the ingredients in the feeding tube.
8 After processing, release the on/off button or the turbo speed button to switch off the
appliance. Then wait until the combination disc has stopped rotating.
ENGLISH 9