Philips HR7633 Food Processor User Manual


 
ENGLISH 7
Do not use the appliance when the mains
cord, the plug or other parts are damaged.
If the mains cord is damaged, it must be
replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.
Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
When you mount the bowl properly onto the
motor unit, you will hear a click.
The emulsifying disc, the blade and the
kneading accessory have to be placed on the
tool holder that stands in the bowl.
Do not exceed the quantities and preparation
times indicated in the tables and recipes.
Do not exceed the maximum content
indicated on the bowl, i.e. do not fill beyond
the top graduation.
Unplug the appliance immediately after use.
Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
Keep the appliance out of the reach of
children.
Never let the appliance run unattended.
Switch the appliance off before detaching any
accessory.
Never immerse the motor unit in water or
any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
Remove the protective cover from the blade
before use.
Avoid touching the SHARP cutting edges of
the blade and the inserts, especially when the
appliance is plugged in.
If the blade gets stuck, unplug the appliance
before removing the ingredients that are
blocking the blades.
Let hot ingredients cool down before
processing them (max. temperature
80cC/175cF).
Using the appliance
Bowl
C
1 Mount the bowl on the food processor by
turning the handle in the direction of the
arrow until you hear a click.
C
2 Put the lid on the bowl.Turn the lid in the
direction of the arrow until you hear a
click (this requires some force).
Built-in safety lock
B
The motor unit as well as the lid have been
provided with marks.The appliance will only
function if the arrow on the motor unit is placed
directly opposite the mark on the lid.
C
3 Make sure that the mark on the lid and the
arrow on the bowl are directly opposite
1
2
CLICK
1
2
CLICK
CLICK