Filter
Top Products
Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
Page 25 of 44 L22-378 Rev 3
Function Description Button
Basket Lift Output Left
Toggles basket lift output on and off
Display will show [LBASKET]
1
Basket Lift Output Right
Toggles basket lift output on and off
Display will show [RBASKET]
2
Heat Demand Output
Hold the product key 3 to force Heat Demand output
ON. Display will show [HEAT DEM]. Releasing the key
will force output OFF.
3
Side On Output
Toggles the "Side ON" output ON. Display will show
[SIDE ON] Press again to togle output OFF.
4
Drain Switch Input
Display will show state of the Drain Valve input.
Display will show [DRN ON (or OFF)]. Product key 5
indicator shows the ON or OFF state of the input.
5
Heat Feedback Input
Display will show state of the Heat Feedback input
[FBxxx], where xxx is ON or OFF. Key 7
indicator shows the ON or OFF state of the input.
7
6
All display indicators will be forced on. The purpose is
to reveal non-funtional indicators or displays.
Lamp Test
(Press and Hold)
8.5 Diagnostic Menu Entry:
The diagnostic menu is used to determine the functionality of controller outputs and inputs. By
exercising each output and examining inputs, a determination can be made if an appliance problem
is controller related. In the diagnostic menu, product keys are assigned specific inputs or outputs.
All outputs in the ON state should produce 24VDC at the appropriate pins on the controller
connector. Controller inputs can be verified by the on or off state of the indicator above the product
key. This section details the process of checking each input and output.
With display showing press product key 5.
Display will show [DIAGNOST] [DIAGNOST].
The following list describes the function of each key in the diagnostic mode.
8.5.1 Exit Diagnostic Menu:
To exit diagnostic menu, press the key. Display will return to .
Other service menu items may be selected for changes.
8.6 Ready Level:
With display showing press product key 6.
Display shows [READY nn], where “nn” is the value, in degrees below set temperature that the
message is displayed.
To change this value, use the product keys for numeric entry of a new value.
Press the key. Display now shows .