Filter
Top Products
Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
L22-378 Rev 3 Page 26 of 44
8.7 Temperature Operating Range:
Forces the control to display the range of temperatures that may be set by operators.
With display showing press product key 7.
Display shows [RANGE 1] [200-380]. No adjustments are permitted here. This is an
information display only. Press the key. Display returns to .
8.8 More Service Menu Entry:
With display showing press product key 8 to enter submenu. Display now
shows .
Product keys will illuminate where adjustments are permitted; all other keys are inactive. The
following section details each product key function in the
menu.
8.8.1 Instant On Toggle
This setting is to allow disabling the instant on feature. This feature applies a momentary heat
pulse to the appliance when a cook key is pressed. Factory default value is ON.
With display showing , press product key L.
Display will show [INST ON [xxx ], where “xxx” is ON or OFF.
Use product key [0] change value. Press the to save choice.
Display returns to .
8.8.2 Cook Now
Should operators be forced to acknowledge a Cook Done Alarm before starting another cook?
This setting forces that requirement. Factory default value is OFF.
With display showing , press product key 1.
Display will show [NOW xxx] [COOK NOW], where “xxx” is ON or OFF.
Use product key [10/0] change value. Press the to save choice.
Display returns to .
Note: With OFF value selection, operators must acknowledge a done cook [ DONE n] display
before starting any another cooks.
With an ON value, operators are permitted to start a cook on the opposite side before
acknowledging a cook done alarm.
Example: The left display is showing [DONE 2] with the beeper alarm sounding. Indicator 2 is
flashing needing to be acknowledged. All other product indicators are off.
With a set value of OFF, no other cooks can start until product key 2 is pressed to
acknowledge and clear the cook done alarm.
With a value of ON set, a cook on the right side of the control (keys 6-R) may be started
before operator clears the cook done alarm for product key #2 on the left side.