Filter
Top Products
1-4
1.3.3 Electrical Connection
WARNING
The cooker must be electrically grounded in accordance with local codes. If
local codes do not apply, follow the requirements of National Code ANSI/
NFPA 70-1990.
The electrical service used by the cooker must comply with local codes. If there are no local codes
that apply, refer to the National Electrical Code (NEC) to install the service. In Canada, refer to CSA
Standard C22.1, Canadian Electrical Code, Parts 1 and 2, and/or local codes. The power require-
ments for the cooker are shown on the next page.
The cooker is shipped with internal wiring configured to support the voltage and phase requirements
ordered. The wiring configuration can be verified by comparing the schematic supplied with the
cooker to the wiring arrangement in the cooker. Table 1-1 provides a list of cooker models and
voltages available and includes the heating element part number for the specified voltage. Check the
cooker data plate to ensure the cooker to be installed matches the power to be supplied to it.
CAUTION
Connecting the cooker to the wrong facility power supply may damage the
cooker and void the warranty.
Keep the POWER switch OFF until the cooker is ready for use.
It is essential that the cooker be provided with a 2 wire, neutral and ground.