Filter
Top Products
PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers
SG/SSHSeriesServiceManual 46
AdjustingtheMagneticSensor
1. Make sure the sensor is approximately 3/4 inch
from top of the motor to bottom of the sensor.
2. Make sure the sensor is approximately 7 3/4
inch from top of the motor to bottom of the
sensor.
ReplacingtheBasketLiftActuator
1. Cut all zip ties on the basket lift driver board.
2. Disconnect the transformer from the driver
board. See “Wiring Diagram – Basket Lifts” on
page 91.