Filter
Top Products
CHAPTER 4 AWARD
®
BIOS SETUP
4-17
AC97 Audio
This item allows you to decide to Enable/Disable the 850 chipset
family to support AC97 Audio.
AC97 Modem
This item allows you to Enabled or Disabled the AC97 Modem.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or
multiple sector read/write. If your IDE hard drive supports block mode (most
new drives do), select Enabled for automatic detection of the optimal number
of block read/writes per sector the drive can support. The settings are
Enabled and Disabled.
Power On Function
This function allows you to select the item to power on the system.
The settings are Button Only, Mouse Left, Mouse Right, Password, Hotkey
Power On and Keyboard 98.
KB Power on Password
Normally, this item is unselectable. To Enabled this function
choose the “Password” setting in the Power On Function. This will allow
you to input the password for the KB Power On.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD)
installed on the system board and you wish to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field.
The settings are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/
IRQ3, Disabled, Auto.