Filter
Top Products
CHAPTER 4 AWARD
®
BIOS SETUP
4-19
Onboard Parallel Mode
To operate the onboard parallel port as Standard Parallel Port only,
choose “SPP.” To operate the onboard parallel port in the EPP modes
simultaneously, choose “EPP.” By choosing “ECP”, the onboard parallel
port will operate in ECP mode only. Choosing “ECP + EPP” will allow the
onboard parallel port to support both the ECP and EPP modes simultane-
ously. The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following message
will appear: “ECP Mode Use DMA” At this time, the user can choose
between DMA channels 3 or 1. The onboard parallel port is EPP Spec.
compliant, so after the user chooses the onboard parallel port with the EPP
function, the following message will be displayed on the screen: “EPP
Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can be
chosen.
SPP: Standard Parallel Port
EPP: Enhanced Parallel Port
ECP: Extended Capability Port
PWRON After PWR-FAIL
This option will determine how the system will power on after a
power failure.
Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
Midi Port IRQ
This determines the IRQ in which the MIDI Port can use.
Power Status LED
This item determines which state the Power LED will use. The
settings are Blinking (default), Dual, and Single. During blinking, the power
LED will blink when the system enters the suspend mode. When the mode
is in Dual, the power LED will change its color. Choose the single and the
power LED will always remain lit.