Filter
Top Products
CHAPTER 4 AWARD
®
BIOS SETUP
4-9
BIOS Flash Write Control
This option allows you to Enabled or Disabled the BIOS flash
write control.
CPU L1 & L2 Internal Cache
Cache memory is additional memory that is much faster than the
conventional DRAM (system memory). When the CPU requests data, the
system transfers the requested data from the main DRAM into cache
memory, for even faster access by the CPU.
Enabled (default) Enable cache
Disabled Disable cache
Note: The internal cache is built in the processor.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you
power on the computer. If this is set to Enabled, BIOS will shorten or skip
some check items during POST.
Enabled (default) Enable quick POST
Disabled Normal POST
First/Second/Third Boot Device/Other Boot Device
The BIOS attempts to load the operating system from the devices
in the sequence selected in these items. The settings are Floppy, LS120,
HDD-0/SCSI, CD-ROM, HDD-1/HDD-2/HDD-3, ZIP100, USB-FDD, USB-
ZIP, USB-CDROM, USB-HDD, LAN, Disabled.
Swap Floppy Drive
Switches the floppy disk drives between being designated as A
and B. Default is Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed
is 40 or 80 tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all
80 tracks.