Filter
Top Products
INSTALLATION REQUIREMENTS
Please ensure that when the appliance is
installed it is easily accessible to an engineer
in the event of a breakdown.
All installations must comply with
the local authorities requirements
for the discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Before installation check the wall
to which the cooker hood is to be
fitted for electric cables, gas and
water pipes.
This chimney hood is designed to be fixed to
any vertical surface over a cooking area, and
can be used in the extraction mode (ducted
to the outside), or recirculation mode.
The installation work must be undertaken by
a qualified and competent person.
Leisure Consumer Products disclaims any
INSTALLING THE CHIMNEY HOOD
responsibility for damage due to incorrect
installation of the cooker hood or if the hood is
not installed in compliance with relevant
regulations controlling this type of installation.
UNPACKING
The cooker hood is supplied with the
following components for installation:
• Canopy (C), including controls, worktop
illumination and fan unit.
• U-shaped upper chimney section (S).
• U-shaped lower chimney section (I).
• Metal recirculation plate (T).
• 120mm ducting spigot (A).
• 120
÷
125mm ducting spigot (B)
Fixing kit comprising:
• Wall fixing brackets (1, 2 and 3).
• Rawl plugs and screws.
• Document pack.
10