CHARCOAL FILTERS (2)
In the recirulation mode the activated
charcoal filters absorb smells and unwanted
odours.
The charcoal filters cannot be cleaned or
regenerated and must be replaced every four
months, or more frequently if the hood is used
consistently over 4 hours per day.
To remove the charcoal filters, first
remove the metal grease filters.
Holding one filter at a time, turn it anti-
clockwise (B) as illustrated opposite.
We recommend that you wear rubber gloves
when removing the charcoal filters as the
filters will be saturated in grease. Put the
filters into a polythene bag or container so
that the grease and dirt cannot spill out onto
clothing or furnishings.
To replace the charcoal filters, remove
the metal grease filters. Place one
filter at a time over the grill in the motor
housing and turn clockwise into
position (A) as illustrated.
This appliance can be a possible
fire hazard if the grease filters and
charcoal filter are not cleaned and
replaced as recommended.
LIGHTING
To replace a light bulb, remove the
metal grease filters.
If the light bulb fails to function check that the
bulb is fully screwed into the holder.
If bulb failure has occurred then it should be
replaced with a 220-240 Volt 40W clear globe
shaped lamp with a small E14 screw thread.
Replacement charcoal filters may be
purchased by returning the enclosed
order form, or if you wish to pay by credit
card by telephoning 01803 296155.
MAINTENANCE AND CLEANING
7