Filter
Top Products
19
6. General Information
Measures must be taken to ensure that the units that are
subsequently re-sited as freestanding appliances cannot
topple over. This can be achieved by bolting the dishwasher
to the wall or fitting it under a continuous work surface, that
is screwed to the adjacent cupboards.
Information on comparability tests
implemented in compliance with
EN 50242
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See Figs.(6-1), (6-2) and
(6-3).
Capacity: 15 place settings
Comparability programme: Light wash
Rinse-aid setting: 5
Detergent: 7.5g +30g
Height adjustable top-basket must be inserted in the
uppermost position. If the comparability tests do not fully
comply with EN 50242, e.g. degree of soiling, type of dishes
and cutlery, etc. contact the appliance manufacturer before
starting the test.
ArtNo.800-0317 - RDW6015 - Upper rack NEW�
ArtNo.800-0316 - RDW6015 - Lower rack
ArtNo.800-0315 - RDW6015
cutlery rack
Fig.6-1
Fig.6-2
Fig.6-3
DocNo.800-0602 - Installation - RDW6015 dishwasher