Roper SGS395X Range User Manual


 
Caring For Your Range
Bum, Electrical Shock, Fire And
Explosion Hazard
l
Make sure all controls are OFF
and the range is cool before
cleaning.
m Do not use oven cleaners, bleach
01 rust removers.
m Do not use gasoline or other
flammable liquids or vapors to
clean this or any other appliance.
1 Keep the appliance area clear and
free from combustible materials,
gasoline and other flammable
vapors and liquids.
I Do not obstruct the flow of
combustion and ventilation air.
Failure to follow these guidelines
could result in bums, electrical
shock, fire or explosion.
The control knobs
1. Turn control knobs to the OFF
position.
2. Pull control knobs straight off.
3. Wash in warm, soapy water.
4. Rinse well and dry completely. Do
not soak.
The control panel
1. Wipe with warm, soapy water or
spray glass cleaner, and a soft
cloth.
2. Rinse well.
3. Dry with soft cloth.
4. Replace control knobs by pushing
them firmly into place.
NOTE: When cleaning, never use steel
wool, abrasives, or commercial oven
cleaners which may damage the finish.
After cleaning, make sure all control
knobs point to the OFF position.
The surface burner grates
and reflector pans
The surface burners
1. Make sure all surface burners are
off and the surrounding parts are
cool.
2. Lift off the burner grates and
remove reflector pans. I
3. Wash the grates and reflector pans
with warm, soapy water or in a
dishwasher. Use a non-abrasive
plastic scouring pad for heavily-
soiled areas. Rinse and dry well.
4. Replace reflector pans and burner
grates.
The removable cooktop
1. Remove surface burner grates and
reflector pans.
2. Lift front of cooktop enough to
clear front of range. Grasp cool
burner openings. Lift and pull
forward.
3. Wipe surface under cooktop with
warm, soapy water. Use a soap-
filled plastic scouring pad on
heavily-soiled areas.
4. To replace cooktop, lower front of
cooktop while placing into rear
support brackets. Avoid hitting the
control panel.
Personal Injury And Product
Damage Hazard
ADO not try to clean under the
cooktop without removing the
cooktop first. The cooktop could
accidentally fall and injure you.
.Do not drop the cooktop. Damage
can result to the porcelain and
the cooktop frame.
1. Remove the cooktop, following the
instructions above.
2. Wipe off surface burners with
warm, soapy water and a soft cloth
after each use. Use a plastic
scouring pad for cooked-on foods.
3. If ports are clogged, clean with a
straight pin. DO NOT enlarge or
distort the ports. DO NOT use a
toothpick to clean the ports.
Typical surface burner flame
4. Occasionally check the burner
flames for proper size and shape as
shown above. If flames lift off ports,
are yellow, or are noisy when
turned off, you may need to clean
the burners (see above), or call a
qualified technician for adjustment.
53 Replace cooktop.
Page 8