5. CLEANING AND MAINTENANCE
5.1 Cleaning
Be sure that all control switches are off, your appliance cooled and the appliance
is unplugged before cleaning your oven. Check whether the cleaning materials
are appropriate and recommended by the manufacturer before using the cleaning
materials on your oven. As they may damage the surfaces, do not use caustic
creams, abrasive cleaning powders, thick wire wool or hard tools. In case the
liquids that overflow around your oven burn the enameled parts may be damaged.
Immediately clean the overflown liquids.
Cleaning of oven
Wipe the oven with a soft cloth that had been soaked in soapy water after each
use. Later wipe it with a wet cloth once more and then dry it. It may be required to
use a liquid cleaning material from time to time and make a complete cleaning. Do
not clean with dry/powder cleaners or steam cleaners.
Removal of oven door
Saddle
bracket
Recessed
form
1
2
3
To remove the oven door;
• Open the oven door(1).
• Open the saddle bracket up to end
position(2).
• Close the door till it almost reaches to
rd
the full closed position as shown in 3
figure and remove the door by pulling it
towards yourself.
NOTE: To re-assemble the door follow the
opposite rules of removal.
Please pay attention that the
recessed forms should be positioned
properly on the hinge counterparts as
nd
shown on 2 figure.
!
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
19