Filter
Top Products
15
ENGLISH
15
Green Red
7
Press the “ ” button to start dispensing hot water.
8
Dispense water until the no water icon appears.
Note:
You can interrupt the manual rinsing by pressing the “
” button.
9
At the end, ll the water tank again up to the MAX level. Now the ma-
chine is ready for brewing co ee.
You will see the display as shown at the left.
Note:
When you haven’t used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after
you switch it on. Thereafter you need to initiate the manual rinse cycle as
described above.
The automatic rinse/self-cleaning cycle is also automatically initiated when
the machine has been in stand-by mode, or switched o , for more than 15
minutes.
After this cycle has been completed, you can brew a co ee.