36
ENGLISH
3
Put a “Co ee Oil Remover” tablet in the pre-ground co ee com-
partment.
Green
4
Press the “ ” button to select the pre-ground co ee function, without
adding ground co ee.
5
Press the “ ” button to start a co ee brewing cycle.
6
Wait until the machine has dispensed half a cup of water.
7
Switch the power button on the back of the machine to “0”.
10
Remove the drip tray and the co ee grounds drawer and open the
service door. Remove the brew group.
8
Let the solution take e ect for approximately 15 minutes. Make sure
you discard the dispensed water.
9
Switch the power button on the back of the machine to “I”. To turn on
the machine press the “
” button.
Wait until the automatic rinse cycle has been completed.