Filter
Top Products
18
ENGLISH
4
Put the “INTENZA+ “water lter into the empty water tank. Press it until
it cannot move further down.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense the entire water tank by using the hot water function (see
chapter “Hot water dispensing”).
7
Fill the water tank again.
8
Press the “ ” button and scroll the pages by pressing the “ ” button
until the following display is displayed.
Yellow
9
Press the “ ” button to select “ON” and press the “ ” button to con-
rm.
YellowGreen
10
To exit, press the “ ” button. The machine shows this display and is
ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the “INTENZA+” water lter.
Green