Filter
Top Products
101
DESCALING
102
Reset descaling message
In programming function, by pressing keys
,
move the asterisk till the end of the line on the menu
Sign. Descal and confirm the selection with
ENT button.
The following message will be displayed:
"RESET DESCALING "
"NO "
By means of the same keys
, it is possible
to modify the value; Yes or no.
Through this reset operation, the internal counters
of the two water systems are reset and the
message DESCALE is erased.
If the function
"SIGN. DESCAL. "
is selected without the displayed message
Descale, the following message will be
displayed:
"QUANTITY WATER "
"NOT REACHED "
Standard descaling
Switch off the machine. Pour a descaling solution
into the water tank (according to the instructions
on the product package). Place a large container
under the steam/hot water spout (7). Switch the
machine on by pressing the main switch, press
the hot water key and let the descaling solution
in the water tank pour out of the spout for 1 minute
approx.
Press hot water key to complete the operation.
Switch the machine off and let the solution taking
effect for 5 minutes approx. Repeat this procedu-
re two or three times, to empty the water tank.
As soon as descaling has been performed, rinse
the water tank (11) thoroughly and fill it with fresh
water.
Switch on the machine again and let water (2
l approx.) flow out of the steam/hot water
dispensing tube in order to rinse away residues.
Important:
A periodic descaling ensures a correct machine
functioning and avoids expensive repairs. The
machine warranty does not cover damages
occurring as a result of the non-observance of
descaling procedures, improper use and non-
observance of any other instruction contained
herein. Maintain the manufacturer’s adjustment if
the water hardness degree is not known.
Disposal
Machines which are no longer operational
should immediately be made non serviceable,
by cutting the power cord. Machines should be
delivered to a public disposal centre.
Switch off and unplug the machine if it will not be
used for long periods.
Cut the supply power cord and deliver the
machine to a public collecting point.
Should the machine not be used anymore,
switch it off and unplug it.
Keep the machine in a dry place, far from the
reach of children.
Should the machine not be used for a long
period, keep it from dust and dirt
Maintenance
Periodically check the machine working and
clean it in accordance to the instructions.
Troubleshooting
In case of failure, fault or suspected damage
following a fall, unplug the machine immediately.
To fix problems, follow the instructions in the
table. Otherwise contact authorised personnel.
Only skilled personnel are authorised to repair
the machine. The user might incur serious injuries
should repairs not be properly carried out.
The manufacturer declines any liability
whatsoever, should repairs fail to be carried out
according to the instructions contained in this
manual: Furthermore in these cases warranty
rights cannot be honored.
DESCALING
courtesy of