21
INSTALLATION INSTRUCTIONS
INSTALLATION OF THE REFRIGERATOR
LEVELLING
If the front of the appliance is slightly higher than the rear, the door can be opened and closed easier.
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
Loading Plan
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
• Be careful when you open the door in
full swing. It might come in contact with
its adjacent units.
CAUTION
1617.0
908
1391.0
630.6
507
Front ViewSide View
Door
View
To get the maximum energy efficiency, you had bet-
ter give enough clearance of the back side.
To get more space remove the box in the Freezer
and the Fridge,the partition and the upper box in the
Arctic Select Zone, the upper box in the Fresh
Select Zone since it does not effect satisfactory ther-
mal and mechanical characteristics.
NOTE
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
WARNING