Filter
Top Products
30
Reattaching the Freezer Door
REATTACHING THE REFRIGERATOR DOORS
1) Reattach a phillips screw (
➀
) and two hex head
screws (➁) to the hinge completely.
2) Place the hole in the bottom of the door (➃)
over the hinge (
➂
).
3) Insert the upper hinge shaft (➄) into the hole (➅). After levelling between the hinge brackets (➆).
Reattach and close the latch (
➇
) along the arrow.
Connect the water tube (➈) and the wires (
➉
). Then, place the water tube(➈) on the hanger ( )
4) Put the connector ( ) in the guide ( ) of the
connector-cover and close it.
5) Put the front part of the upper hinge cover ( )
on the front part of the upper hinge ( ) and
reattach it from the front of the upper hinge
cover first.
6)
Reattach a phillips screw to the hinge cover ( ).
Be sure to insert the water tube and push to the end.
NOTE
14
15
16
12 13
11